Thursday, April 28, 2011

Polaris RZR Lift Kit

I installed a lift kit on a Polaris Ranger RZR.  The kit raised the vehicle about 2 1/2" inches to allow room to put bigger tires on it.  The $200 kit consisted of these 8 steel plates and a few bolts and spacers.

 It was a nice warm sunny day so I decided to work on it outside.  The person in the photo is Carl, one of the local high school students.  He is working with me this week as part of a vocational training unit at school.

The plates bolt on to the A-arms and raise the shock mount up a little.  I had to use a ratchet strap to compress the springs to get everything lined up.  The whole project took about 3 hours.

No comments:

Post a Comment